Sani-Con® Turbo 600S
Permanent Storage Bay Mount
- Sani-Con® Turbo 600S - with OT (over-temperature) protected pump
- Hose and nozzle assembly with nozzle caps
- Mounting brackets (2)
- Switch box assembly
- 35 AMP fuse
- Electrical connectors (2)
Where to install it?
The system is designed for Class A motorhomes. The storage bay on these RVs has the ideal height, with enough clearance for installing the pump and attaching the sewer inlet hose to the outlet. In addition, easy access to gray and black water valve pulls is available.
Sani-Con® Turbo 600 relies on a 1/2-hp pump for evacuating waste from the tanks. The pump can be connected to the generator or a 12 V battery, and it's controlled by a switch box assembly.
How does it work?
Turbo 600S is an easy-to-use system. Once permanent connections have been made, Sani-Con® Turbo 600 is fully operational and ready to evacuate waste.
Step 1: Remove the cap and connect the nozzle to the dumping station
Step 2: Open the black water valve
Step 3: Turn on the macerating pump
Step 4: When the black water tank is empty, the pump will start sounding different
Step 5: Turn off the pump and close the black water tank valve
Step 6: Empty the grey water tank to give the whole system a rinse
Step 7: Disconnect the nozzle, replace the cap and return the Sani-Con® Turbo in the storage compartment
How to install Sani-Con® Turbo 600:
|Sani-Con® Turbo 600S Pump Dimensions|